> I'd like to suggest that no RTTY activity happen within 3-4 kcs
> of the beacon frequencies.
This comes up after every RTTY contest ... use a CW filter instead
of an AM filer for copying the CW beacon. Most experienced RTTY
operators will stay at least 300-500 Hz away from the beacon. The
mark frequencies to avoid are between 14,099.7 and 14,100.5.
> -----Original Message-----
> From: cq-contest-bounces@contesting.com
> [mailto:cq-contest-bounces@contesting.com] On Behalf Of B.
> Scott Andersen
> Sent: Tuesday, January 08, 2008 10:34 AM
> To: cq-contest@contesting.com
> Subject: Re: [CQ-Contest] RTTY Reflections
>
>
> Just a quick note: I tuned to 14.100 to check out the DX beacon this
> weekend only to hear RTTY there instead. These beacons on 20m-10m
> are very useful for DXers, but only if they can be heard. I'd
> like to
> suggest
> that no RTTY activity happen within 3-4 kcs of the beacon frequencies.
>
> -- Scott (NE1RD)
>
> B. Scott Andersen | "Magic is real, unless declared integer."
> bsandersen@mac.com | -- The collected sayings of Wiz Zumwalt
> Acton, MA (NE1RD) | http://www.bsandersen.com
>
>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>
>
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|