CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] ClusterJoin... Mix your Telnet Cluster Spots and CWSkim

To: "'Gerry Hull'" <gerry@w1ve.com>, "'CQ-Contest'" <cq-contest@contesting.com>, "'Tom - N1MM'" <Tom@n1mm.com>, <yccc@yccc.org>
Subject: Re: [CQ-Contest] ClusterJoin... Mix your Telnet Cluster Spots and CWSkimmer spots into same application.
From: "David Robbins K1TTT" <k1ttt@arrl.net>
Reply-to: k1ttt@arrl.net
Date: Mon, 10 Nov 2008 22:00:38 +0000
List-post: <cq-contest@contesting.com">mailto:cq-contest@contesting.com>
DANGER!  DO NOT send the same outgoing spot to multiple nodes, this can
result in your spots showing up multiple times around the world and get
sysops annoyed at you.


David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
 

> -----Original Message-----
> From: cq-contest-bounces@contesting.com [mailto:cq-contest-
> bounces@contesting.com] On Behalf Of Gerry Hull
> Sent: Monday, November 10, 2008 21:40
> To: CQ-Contest; Tom - N1MM; yccc@yccc.org
> Subject: [CQ-Contest] ClusterJoin... Mix your Telnet Cluster Spots and
> CWSkimmer spots into same application.
> 
> http://www.w1ve.com/ClusterJoin.zip
> 
> This is free software.
> 
> What it is:   It's a TCP Daemon that listens for connections on a port (23
> is the default, Telnet) and connects to other servers, and mixes the
> content.
> 
> Once you've connected, you can then connect to as many telnet spot sources
> as you would like.
> 
> I dreamed this up as a way to connect CW Skimmer and an external cluster
> to
> N1MM at the same time....  Therefore, get the spots from Skimmer along
> with
> everything from the net.
> 
> 
> Example:
> 
> ------   K1TTT.NET (for example)
>                                                                        /
> N1MM setup to connect to ClusterJoin (locahost)
>                                                                       \
> 
> ------- CW SKIMMER on localhost:7300
> 
> 
> There is no limit to the number of clients that can connect to
> ClusterJoin,
> as well as no limits on the number of clusters you can connect to.
> 
> I think, perhaps, it's silly to connect more than one real-world cluster,
> unless you want  to...
> 
> All traffic sent to ClusterJoin  goes to all connected telnet sessions.
> you must log in to each session.
> 
> You'lll get instructions when you log in.
> 
> ClusterJoin.exe is a 14Kb file, and is a Windows Console application.
> Just leave it running and minimize.
> It is a .Net application and requires the .Net Framework 2.0 be installed
> on
> your system.  You can get that from Microsoft's site if you don't have it.
> 
> No install -- just extract ClusterJoin.exe from the Zip file and go.
> 
> I'm not on the CWSkimmer reflector, so some one please pass it on.
> 
> Enjoy!
> 
> 73, Gerrry W1VE
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest



_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

<Prev in Thread] Current Thread [Next in Thread>