[Top] [All Lists]

Re: [CQ-Contest] managing headphone cord

To: <cq-contest@contesting.com>
Subject: Re: [CQ-Contest] managing headphone cord
From: "Kimo Chun" <kimo@lava.net>
Date: Fri, 18 May 2012 15:31:21 -1000
List-post: <cq-contest@contesting.com">mailto:cq-contest@contesting.com>
I bought a mobile microphone retractor device that is sold for truckers. I
bought it at Dayton. I haven't used it yet but would have to search for it.
I assume it is still available somewhere. You can also look for the small
retractors used for key sets that are sold at Key shops.


73 Kimo KH7U



Date: Thu, 17 May 2012 17:59:47 -0400

From: Pete Smith N4ZR <n4zr@contesting.com>

Subject: [CQ-Contest] managing headphone cord

To: reflector cq-contest <CQ-Contest@Contesting.COM>

Message-ID: <4FB574D3.501@contesting.com>

Content-Type: text/plain; charset=ISO-8859-1; format=flowed


I've recently bought a set of Yamaha CM500 headphones for contesting, which
are terrific.  The one problem, paradoxically, is that the cord is too long.
I don't want to cut it if I can avoid it, because there are times when the
extra length could be pleasant.  However, it occurs to me there must be some
sort of spring-loaded reel device used for cord management or some other
related purpose that could be put to use here.  

The cord itself is very light and flexible, so it wouldn't require much


Any ideas?



73, Pete N4ZR

The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net
<http://reversebeacon.net/> , blog at reversebeacon.blogspot.com, spots at
telnet.reversebeacon.net, port 7000 and arcluster.reversebeacon.net, port





CQ-Contest mailing list

<Prev in Thread] Current Thread [Next in Thread>