CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] Simultaneous receive and transmit in one radio?

To: Pete Smith N4ZR <n4zr@contesting.com>
Subject: Re: [CQ-Contest] Simultaneous receive and transmit in one radio?
From: Charles Harpole <hs0zcw@gmail.com>
Date: Sun, 27 Oct 2013 07:18:41 +0700
List-post: <cq-contest@contesting.com">mailto:cq-contest@contesting.com>
An FT DX-9000d owner responds...........
Single Operator/TWO radios is done in the FT-9000, AS I SEE IT, by
programming the radio to receive on Antenna 2 while rev and xmit on Antenna
1.  This setting will allow transmitting on 1 and, upon stand by, reception
on two antennas simultaneously which can be on two separate bands.

That allows deciding and quickly selecting which band/antenna socket you
want to use to transmit on next.  However, I have not found a way to xmit
and receive at the same time.  I will experiment more.  73, Charly


On Fri, Oct 25, 2013 at 5:50 PM, Pete Smith N4ZR <n4zr@contesting.com>wrote:

> I wonder... in the CQWW rules for the Cklassic overlay it says " The one
> radio must not be able to receive while transmitting."  I did not believe
> that such a thing existed - at least not in a commercially-available radio
> - but the 2005 QST review of the FTDX9000 says it is capable of "SO2R in
> one box."  Is this correct?  Are there other radios with this capability?
>
> --
> 73, Pete N4ZR
> Check out the Reverse Beacon Network at
> http://reversebeacon.net,
> blog at reversebeacon.blogspot.com.
> For spots, please go to your favorite
> ARC V6 or VE7CC DX cluster node.
>
> ______________________________**_________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/**mailman/listinfo/cq-contest<http://lists.contesting.com/mailman/listinfo/cq-contest>
>



-- 
Charly, HS0ZCW
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

<Prev in Thread] Current Thread [Next in Thread>