CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] waedc

To: Radio K0HB <kzerohb@gmail.com>
Subject: Re: [CQ-Contest] waedc
From: Saulius Zalnerauskas <ly5w.sam@gmail.com>
Date: Sat, 9 Aug 2014 02:42:27 +0300
List-post: <cq-contest@contesting.com">mailto:cq-contest@contesting.com>
Hi,

this is the answer from Contest manager:

That is correct.

LG

Helmut

www.df7zs.de


So, if I use well prepared modern station with CAT, etc,..... I need to set
in LOG wrong frequency? Or not work them? But all others will work .....

Like 7000? I can't believe if some rare multiplier, PY9, VK1 will transmit
on freq up from rules - all these QSO would be removed :)


TO BE OR NOT BE?

Anyway CU All in Contest.

I drived to much kilometers to back home......


73, Sam LY5W (low Power - Big Antenna's)

any QTC?


On Sat, Aug 9, 2014 at 1:29 AM, Radio K0HB <kzerohb@gmail.com> wrote:

> Although this might "crimp my style", I applaud DARC for giving more than
> lip-service to compliance with IARU band plans.
>
>
> 73, de Hans, K0HB
> "Just a Boy and his Radio"
> 7⃣3⃣
>
>
> On Fri, Aug 8, 2014 at 2:23 PM, Saulius Zalnerauskas <ly5w.sam@gmail.com>
> wrote:
>
>> 2 Bands
>>
>> *3.5 - 7 - 14 - 21 - 28 MHz*.
>>
>> According to IARU recommendations operation should be avoided outside
>> contest-preferred segments. No operation to take place on:
>>
>> *CW* : 3560-3800; 7040-7200; 14060-14350 kHz
>> *SSB*: 3650-3700; 7050-7060; 7100-7130; 14100-14125; 14300-14350 kHz.
>>
>> so if i call CQ on 14061 , 7044, - those QSO will be removed?
>>
>> or move multiplier - for example.
>>
>> BTW - 20 and 40m are full sometimes. When I run my LP - there is the best
>> place to make a QSO.
>>
>> CUL in WAE CW
>>
>> LY5W Sam
>> _______________________________________________
>> CQ-Contest mailing list
>> CQ-Contest@contesting.com
>> http://lists.contesting.com/mailman/listinfo/cq-contest
>>
>>
>
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
<Prev in Thread] Current Thread [Next in Thread>