CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] Hustler Mobile Whips

To: cq-contest@contesting.com
Subject: Re: [CQ-Contest] Hustler Mobile Whips
From: George via CQ-Contest <cq-contest@contesting.com>
Reply-to: George <georgek5kg@aol.com>
Date: Tue, 26 Apr 2016 16:45:59 -0400
List-post: <cq-contest@contesting.com">mailto:cq-contest@contesting.com>
A small drop of Loctite will hold the set screws in place. Be sure to use blue Loctite so you can loosen the set screws if you really need to. I advise against red Loctite, as you will not break the screws loose if you use that. Available at any good hardware store.

73, George, K5KG

On 4/26/2016 2:11 PM, Dave Edmonds wrote:
Hi Jeff,

Those small set screws can be terminal out there on the road... A friend of
mine, Skip who makes duck decoys invented magnetic duck wings adapters that
attach to the decoy.  The other decoys use tiny set-screws, which the
hunters drop in the water or in their blind. Thought that was a pretty cool
idea... Don't know if this tech can be transferred to mobile antennas some
how...

Jeff... I have 40m and 20m hustler resonators with compression fittings.
Haven't used these lately...If you need these, I could ship them to
y'all.....

73s Dave WN4AFP


<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>
Virus-free.
www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
<#DDB4FAA8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

On Tue, Apr 26, 2016 at 11:14 AM, Jeff Clarke <ku8ejeff@mediacombb.net>
wrote:

Thanks everyone for their tips. It turns out the Allen wrench size is 3/32
inch,  not the thread size. The set screw is 2050-26 10-32 x 1/8 inch.

I contacted New-Tonics and they are sending me 10 spare set screws for
free! Now that's great customer service.

BTW I mentioned to them that I hate their newer design that uses the set
screws to hold the whip to the resonator and how I wished they would go
back to the compression fitting. They are going to pass this along to their
engineering department.

Jeff KU8E

Sent from my Verizon Wireless 4G LTE Droid
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest




--
George Wagner, K5KG
Sarasota, FL
941-400-1960

_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

<Prev in Thread] Current Thread [Next in Thread>