CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] antenna modeling using local terrain

To: cq-contest@contesting.com
Subject: Re: [CQ-Contest] antenna modeling using local terrain
From: Christian Schneider <prickler.schneider@t-online.de>
Date: Sat, 13 Aug 2016 11:52:24 +0200
List-post: <cq-contest@contesting.com">mailto:cq-contest@contesting.com>
Anyone who might help with a still available and non-pirated version of K6STI software for verticals?
73, Chris DL8MBS


Am 13.08.2016 um 03:35 schrieb Dave - AB7E:
Yes, it is understood that HFTA only works with horizontal polarization.  There 
is no implication that HFTA works with vertical polarization ... it doesn't.  
The best you could hope for is to extract from EZNEC only the horizontal 
component from your Inverted-L, but that would tell you pretty much nothing 
worth knowing.

Dave   AB7E



------Original Mail------
From: "FritzOAQ" <fritz@k4oaq.com>
To: <cq-contest@contesting.com>,
     <john@kk9a.com>
Sent: Fri, 12 Aug 2016 17:41:49 -0400
Subject: Re: [CQ-Contest] antenna modeling using local terrain

Hmmm, this page http://k6tu.net/?q=AdvancedOptions seems to imply otherwise
which reads, in part, "... including the option to upload a custom antenna
model which can be generated from antenna modeling software such as EZNEC
...". I believe this page is talking abt K6TUs utility HFTASWEEP. Maybe it's
understood that it only works for horz antennas???
Fritz K4OAQ

-----Original Message-----
From: john@kk9a.com [mailto:john@kk9a.com]
Sent: Friday, August 12, 2016 5:21 PM
To: cq-contest@contesting.com
Cc: fritz@k4oaq.com
Subject: re: [CQ-Contest] antenna modeling using local terrain

There is no need to wait, HFTA will not factor in local terrain when
modeling your Inverted L.  HFTA only works with horizontal antennas. There
is nothing that I am aware of usable for terrain analysis of verticals.

John KK9A


To:     <cq-contest@contesting.com>
Subject:        [CQ-Contest] antenna modeling using local terrain
From:   "FritzOAQ" <fritz@k4oaq.com>
Date:   Fri, 12 Aug 2016 14:03:49 -0400


I'm looking for advice in direction to head in acquiring the necessary
software to model an inv L and other antennas factoring in my local terrain.
I currently have EZNEC v 5.0.62. As far as I can tell I don't see where
EZNEC can factor in local terrain. I've read abt HFTA and HFTASWEEP at
k6tu.net & it appears they can do what I want. I'm a little fuzzy on how it
uses a .txt file from EZNEC tho. As best as I can tell to get HFTA, I have
to buy ARRLs ant book & wait on it to be mailed to me. You'd think that with
them being so progressive with moving contest scores to the Internet that
they'd have a way to purchase their ant book & software on-line . maybe I
missed how to do that. (Sorry, I cudn't resist!) So, are there other avenues
to take that will get me there?

73, Fritz K4OAQ


_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest


_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

<Prev in Thread] Current Thread [Next in Thread>