CQ-Contest
[Top] [All Lists]

[CQ-Contest] Yaesu rotor control question

To: CQ Contest <cq-contest@contesting.com>
Subject: [CQ-Contest] Yaesu rotor control question
From: John Geiger <af5cc2@gmail.com>
Date: Sat, 11 Aug 2018 17:16:42 -0500
List-post: <mailto:cq-contest@contesting.com>
I am sure many contesters are using Yaesu rotors, and some are probably
controlling them with a Yaesu rotor, or even remotely using the Yaesu PCC
radio control software, so hopefully someone on the list can answer this
question for me:

When controlling one of the Yaesu rotors, like the G800 or G1000 with a
Yaesu radio like the FT950 or FTDX3000, does the rotor need to have the
Yaesu GS-232 rotor computer interface with it, or can you run the SCU-27
cable straight from the control box to the radio without needing the GS-232
interface?

73 John AF5CC
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

<Prev in Thread] Current Thread [Next in Thread>
  • [CQ-Contest] Yaesu rotor control question, John Geiger <=