CQ-Contest
[Top] [All Lists]

[CQ-Contest] Fwd: [wsjtgroup] WSJT-X 2.1.0-rc6

To: NCCC <NCCC@groups.io>, cq-contest <cq-contest@contesting.com>
Subject: [CQ-Contest] Fwd: [wsjtgroup] WSJT-X 2.1.0-rc6
From: Jim Brown <k9yc@audiosystemsgroup.com>
Reply-to: k9yc@arrl.net
Date: Sun, 2 Jun 2019 11:49:55 -0700
List-post: <mailto:cq-contest@contesting.com>



-------- Forwarded Message --------
Subject: [wsjtgroup] WSJT-X 2.1.0-rc6
Date: Sun, 2 Jun 2019 14:32:20 -0400
From: Joe Taylor joe@Princeton.EDU [wsjtgroup] <wsjtgroup-noreply@yahoogroups.com>
Reply-To: Joe Taylor <joe@Princeton.EDU>
To: wsjtgroup@yahoogroups.com <wsjtgroup@yahoogroups.com>

To:   Users of WSJT-X -- especially those interested in radio contesting
From: WSJT Development Group

As you know, we have been developing a protocol called FT4 for use in radio contesting. A new version of FT4 is now available for testing in WSJT-X 2.1.0-rc6.

PLEASE NOTE THAT FT4 IN RELEASE CANDIDATE 6 IS NOT COMPATIBLE WITH THAT IN ANY PREVIOUS RELEASE.

Therefore: Please stop using WSJT-X 2.1.0-rc5. If you wish to use FT4 after today or to take advantage of other recent program corrections or enhancements, you should use WSJT-X 2.1.0-rc6.

MOCK CONTEST SESSION
--------------------
A special session for testing the contesting features of FT4 is scheduled for six hours from June 4, 1900 UTC through June 5, 0100 UTC: Tuesday afternoon/evening, North American time, starting about 48 hours from now. Get on the air whenever you can during this mock contest session, using dial frequency 7.090 or 14.080 MHz, as appropriate to the time of day. As in previous tests, be sure to check "RTTY Roundup messages" on the Settings | Advanced tab.


Here's a list of changes, improvements, and bug fixes that have been made since WSJT-X 2.1.0-rc5:

IMPORTANT CHANGES TO THE FT4 PROTOCOL *** NOT BACKWARD COMPATIBLE ***
  - T/R sequence length increased from 6.0 to 7.5 seconds
  - Symbol rate decreased from 23.4375 to 20.8333 baud
  - Signal bandwidth decreased from 90 Hz to 80 Hz

OTHER FT4 IMPROVEMENTS
  - Allowable time offsets -1.0 < DT < +1.0 s
  - Tx4 message with RRR now allowed, except in contest messages
  - Audio frequency is now sent to PSK Reporter
  - Add a third decoding pass
  - Add ordered statistics decoding
  - Improved sensitivity: threshold S/N is now -17.5 dB
  - Improved S/N calculation
  - In FT4 mode, Shift+F11/F12 moves Tx freq by +/- 100 Hz

OTHER IMPROVEMENTS
  - Improvements to accessibility
  - Updates to the User Guide (not yet complete, however)
  - New user option: "Calling CQ forces Call 1st"
  - N1MM Logger+ now uses the standard WSJT-X UDP messages
  - OK/Cancel buttons on Log QSO window maintain fixed positions
  - Put EU VHF contest serial numbers into the ADIF SRX and STX fields

BUG FIXES
  - Fix generation of Tx5 message when one callsign is nonstandard
  - Fix a bug that prevented use on macOS
  - Fix a bug that caused mode switch from FT4 to FT8
  - Fix a bug that caused FT4 to do WSPR-style band hopping
  - Fix a bug that caused a Fortran bounds error

Release candidate WSJT-X 2.1.0-rc6 will be available for beta-testing through July 21, 2019. It will be inoperable during the ARRL June VHF QSO Party (June 8-10) or ARRL Field Day (June 22-23). It will permanently cease to function after July 21, 2019. If all goes according to plan, by that time we will have made a General Availability (GA) release of WSJT-X 2.1.0.

Downloadable installation packages for WSJT-X 2.1.0-rc6 under Windows, Linux, and macOS are available on the WSJT-X web page:

http://physics.princeton.edu/pulsar/k1jt/wsjtx.html

     -- 73 from Joe, K1JT; Steve, K9AN; and Bill, G4WJS


------------------------------------
Posted by: Joe Taylor <joe@princeton.edu>
------------------------------------

To unsubscribe, send an email to:
wsjtgroup-unsubscribe@yahoogroups.com
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/wsjtgroup/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/wsjtgroup/join
    (Yahoo! ID required)

<*> To change settings via email:
wsjtgroup-digest@yahoogroups.com wsjtgroup-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
    wsjtgroup-unsubscribe@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/

_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

<Prev in Thread] Current Thread [Next in Thread>