I used N1MM+ with the special version of WSJT-x and it behaved mostly OK, but I
did notice one problem. If I was called by a station or there was a belated
reply where his grid square didn't populate in the WSJT program, N1MM wouldn't
let me log it. I had to write these down on paper, and add them manually to
the exported file. I let N1MM+ generate the Cabrillo file and added the missing
Qs there.
I don't think the integration is seamless, and message sequencing needs to be
improved a bit but on the whole it was a mostly-painless event with N1MM+ and
WSJT. What I do wish is that FT4 was more widely accepted. That is far better
suited to contesting than FT8.
---------------------------------------------
GO FRC!
Peter, W2IRT
www.facebook.com/W2IRT
-----Original Message-----
From: CQ-Contest <cq-contest-bounces+contesting=w2irt.net@contesting.com> On
Behalf Of Terry Zivney
Sent: Monday, June 15, 2020 1:06 PM
To: cq-contest@contesting.com
Cc: SMC Reflector <smc@w9smc.com>; HDXCC <hdxcc@groups.io>
Subject: [CQ-Contest] Logging quirks with WSJT-X
I operated the ARRL VHF QSO party sporadically this past weekend.
I noticed some quirks in the logging process. I was justusing the barebones
WSJT-X 2.10 program, as I'm suremany casual FT-8 contesters might.
There appear to be 3 different logs kept within WSJT-X.There is the wsjtx.log
file and the wsjtx_log.adi filewhich are used for all QSOs. There is also a
.cbr filecreated when you use the contest mode under the Advancedtab for
special operating activity.
These 3 logs do not agree!!!!!!!
I made 106 QSOs in total. Four of the QSOs in the wsjt.logfile were not in the
.cbr file. An additional three QSOswere in the wsjtx_log.adi file that were
not in the wsjtx.log file.
Some of these problems appeared to occur when the otherham was not using the
contest mode (this included a QSOwith a major HF MM player). I switched to the
regularmode to complete the QSO, but logging that QSO did notenter it into the
.cbr file. I have no idea why therewere 3 QSOs in the wsjtx_log.adi file that
did not makeit into the wsjtx.log file.
These problems occurred with both the FT8 and FT4 modes.
Since I find it easier and more natural to cut theprograms Cabrillo output for
submission, that processalone could account for a 7 percent error rate ina
supposedly error-proof QSO.
Terry N4TZ
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|