I recently got a RigExpert Stick pro. IT's a pretty nice piece of kit.
The NanoVNA is also nice but to me it has a different purpose, even
though it can do antenna measurements, I use it for tuning filters and
such.
Ria
N2RJ
On Mon, Feb 6, 2023 at 3:41 AM Barry Jacobson <bdj@alum.mit.edu> wrote:
>
> Hi, I need advice on getting one of the antenna analyzers on the market. I
> have an 80 meter dipole fed with ladder line from an MFJ 989D tuner. I
> seldom use 10 meters, but tried to go on the 10-10 phone contest today.
> Would not tune in that segment of band. Tuner instructions say most
> commonly need to shorten feedline by 1/8 wavelength at band that won't
> tune. Before cutting line and possibly messing up other bands that work
> fine, I would like to know exactly where I stand on each band. I could use
> a device that will tell me exact length of line currently, and what effect
> shortening will have on all other bands, and whether the new impedances
> will be within range of capability of tuner. I don't mind learning complex
> impedances and Smith charts if necessary, but want to do it systematically.
> Don't know if devices out there do this for you. Some possibilities I have
> heard of are NanoVNA, Rigexpert, MFJ antenna analyzer. I don't know if I
> should go on EZNEC. The last 15 feet of each end of dipole droop
> vertically, but don't think that's the main problem.
>
> There is a whole page of devices. Don't know where to begin.
>
> https://www.eham.net/reviews/view-category?id=31
>
> Any advice from an expert greatly appreciated.
>
> 73,
>
> Barry
>
> --
> Barry Jacobson
> WA2VIU
> bdj@alum.mit.edu
> @bdj_phd
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|