CT-User
[Top] [All Lists]

FT-1000 and J-Com TC-Y1 Interface (timeout error)

To: <ct-user@contesting.com>
Subject: FT-1000 and J-Com TC-Y1 Interface (timeout error)
From: srkelly%agora.rdrop.com@us1rmc.enet.dec.com (Steve Kelly)
Date: Tue, 14 Feb 1995 14:48:51 -0500
I just received the J-Com interface and have been trying to get it working
for the upcoming ARRL DX contest.

When using CT all I get is a timeout error.  When using TR Log I can
control the mode, band up & down, qsy vfo in the S&P mode, type freq into
call window to send the radio to a new freq, but the thing doesn't seem to
be sending any vfo data to the computer.  RX by radio but no TX to
computer.

Hardware:
        486DX33 & STB 4-Com Serial card (4 high speed ports)
        Yaesu FT-1000 (firmware v6.0)
        J-Com TC-Y1 Interface (one week old)
        TR Log v5.16
        CT v9.13

Baud rate set to 4800 in software.

Anyone else have this problem?
What was your fix?

--------
Steve Kelly
srkelly@agora.rdrop.com



% ====== Internet headers and postmarks (see DECWRL::GATEWAY.DOC) ======
% Received: from inet-gw-3.pa.dec.com by us1rmc.bb.dec.com (5.65/rmc-22feb94) 
id AA17622; Tue, 14 Feb 95 14:49:29 -050
% Received: from agora.rdrop.com by inet-gw-3.pa.dec.com (5.65/10Aug94) id 
AA19124; Tue, 14 Feb 95 10:01:39 -080
% Received: from [199.2.212.13] by agora.rdrop.com with smtp (Smail3.1.28.1 #8) 
id m0reRYz-0001EzC; Tue, 14 Feb 95 10:01 PS
% Message-Id: <v01510104ab669cec995d@[199.2.212.13]>
% Mime-Version: 1.0
% Content-Type: text/plain; charset="us-ascii"
To: <ct-user@contesting.com>
% Date: Tue, 14 Feb 1995 17:59:47 +0000
% To: sttng::ct-user
% From: srkelly@agora.rdrop.com (Steve Kelly)
% Subject: FT-1000 and J-Com TC-Y1 Interface (timeout error)

--
Submissions:              ct-user@eng.pko.dec.com
Administrative requests:  ct-user-request@eng.pko.dec.com
Problems:                 reisert@eng.pko.dec.com

<Prev in Thread] Current Thread [Next in Thread>
  • FT-1000 and J-Com TC-Y1 Interface (timeout error), Steve Kelly <=