CT-User
[Top] [All Lists]

HARD CONNECT TO CLUSTER

To: <ct-user@contesting.com>
Subject: HARD CONNECT TO CLUSTER
From: donovanf@sgate.com (Frank Donovan)
Date: Wed, 27 Sep 1995 22:54:23 -0400 (EDT)
Its really quite easy!

Set the SETUP menu in CT so that one of your serial ports is set to: TNC
Use a null-modem cable to connect your contest logging computer to your a 
serial port on your PacketCluster node.  A null-modem cable is the same 
type of cable you use for the CT network.  

Assuming you have connected to serial port 1 on your PacketCluster node, 
and selected 4800 baud on the CT setup screen, the command you type on the 
PacketCluster keyboard is:  ENABLE/CONSOLE2 COM1 4800

73!
Frank
W3LPL
donovanf@sgate.com

On Wed, 27 Sep 1995 rthorne@ibm.net wrote:

> Need some help.  Trying to figure out how to connect directly to a
> cluster node.  
> 
> I'll be at N4ZC again this year.  Roger has a cluster pc at his
> qth.  We would like to hook up the CT network directly to the
> cluster so we don't need to have a separate tnc/rig etc.
> 
> 73,
> Rich Thorne - WB5M

--
Submissions:              ct-user@eng.pko.dec.com
Administrative requests:  ct-user-REQUEST@eng.pko.dec.com
WWW:                      http://ve7tcp.ampr.org/mailing-lists/ct-user.html
Questions:                reisert@eng.pko.dec.com

<Prev in Thread] Current Thread [Next in Thread>