At 06:26 PM 8/3/96 -0400, you wrote:
>OK, you guys with CT network experience, a question for you.
>
>Will a "full" null modem cable between the computers, along with
>setting up hardware flow control on the COMTSRs (-RTS command line
>switch), yeild any improvements? The errors we experience don't seem
>to be related to network speed, as they occur at 1200 baud. The
>serial ports use 16550 UARTS.
Hi Dave,
I'm pretty sure that when I was corresponding with Ken about the -loop
option that he told me that the software does not use any of the RTS/CTS
flow control so hooking those signal up and making the UART look at them
would only stop traffic if there was a hardware problem like one computer
not being on or something.
73, Fred KE7X
Fred Cady (ieefc@msu.oscs.montana.edu)
Department of Electrical Engineering
Montana State University
Bozeman, MT 59717
(406)-994-5976
--
Submissions: ct-user@ve7tcp.ampr.org
Administrative requests: ct-user-REQUEST@ve7tcp.ampr.org
WWW: http://www.ve7tcp.ampr.org/Software/ct
Questions: owner-ct-user@ve7tcp.ampr.org
|