[Top] [All Lists]

[ct-user] FWD: Writelog problem in 9.26

To: <ct-user@contesting.com>
Subject: [ct-user] FWD: Writelog problem in 9.26
From: Jim Reisert <AD1C@tiac.net> (Jim Reisert)
Date: Wed, 09 Apr 1997 22:00:58 -0400
I ran across this message tonight by accident.  Guess the WRITELOG problem
in 9.26 isn't really new news!

- Jim AD1C

To: <ct-user@contesting.com>
>Date: Mon, 6 May 1996 08:28:53 +0000 (GMT)
>From: hremijn
>Reply-To: hremijn
>X-Sender: hremijn@pa3eob.ampr.org
>CC: cq-contest@tgv.com
>Subject: Re: What's
happng with CT 9.26?
>I had the same problem with the gereal protection
feature when I loaded 
>the comtsr's in high memory. When using low memory
no problem.
>Henk Remijn    PA3EOB          System engineer at
hremijn@zeelandnet.nl   Cargill Milling
>        pa3eob@pi8goe.ampr.org
Bergen op Zoom
>        Henk_Remijn@cargill.com        The Netherlands
Sun, 5 May 1996 py2ny@sp-gw.py2bjo.ampr.org wrote:
>> Hi friends.
>> Two
questions about CT 9.26
>> 1.  I'm  having  problems  with  command
WRITELOG. All time that is used I have
>> message like GENERAL PROTECTED
FAILURE and after it, I'm again on DOS prompt. I
>> remember  for  all of
you that I bought program directly from K1EA staff. I can
>> see  that  the
 problem  occurs  when  files from the bands, like CQ96CW.10, or
IARU96.20 will be write. What's ur opinion?
>> 2.  When  the  logs  are  ok
to print, I can see with DOS editor that bands are
>> displayed  in  two
diferents ways: two digits (40, 20, 15, 10), or MHz (21.000,
>> 7.150,
28.000). How I can to do all similar?
>> Thanks for all and 73  -
PY2NY  (PW2N in contests...)    Vitor

Submissions:              ct-user@ve7tcp.ampr.org
Administrative requests:  ct-user-REQUEST@ve7tcp.ampr.org
WWW:                      http://www.ve7tcp.ampr.org/Software/ct
Questions:                owner-ct-user@ve7tcp.ampr.org

<Prev in Thread] Current Thread [Next in Thread>
  • [ct-user] FWD: Writelog problem in 9.26, Jim Reisert <=