At 03.18 13/08/98 +0100, you wrote:
>
>I'm re-visiting this subject again after a bit more testing. I run
>Version 9.34 on which I have to use the Yaesu FT-1000 radio parameter to
>correctly control an FT-990. Using 9.34, CW keying on the LPT port is
>OK.
>
>Version 9.37 corrected the FT-990 radio control situation. However, it
>now unfortunately causes CW keying on the LPT port to become erratic.
>Spacing is off and sometimes it will just send random characters. If I
>remove radio control, keying is OK.
>
>Just an observation after further testing. For now, I'll stay with 9.34.
>
>Keith Beebe W3KB
>
Keith here 9.37 works great on LPT1 and LPT2. If I remember well in last
messages of some weeks ago it resulted being a RF problem over the computer...
Ciao es cu (waiting paddle support on computer...:-)) )
Sante
--
\\||//
THIS MESSAGE WAS SENT BY: (.)(.)
-----------------------------oOOo--(__)--oOOo----------------------------
Sante Lillo, IK0HBN | Home telephone: +39-0761-407543
Localita' Saineta, 3 | Fax on request : as above
01030 Bassano in Teverina (VT) Italy | Cell. telephone: +39-0338-6825052
E-Mail: ik0hbn@isa.it | packet: IK0HBN@IK0MIL.ILAZ.ITA.EU
Home Page: <http://www.qsl.net/ik0hbn>| DX cluster : IK0HBN > I0JBL-6
-------------------------------------------------------------------------
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|