do i have something wrong? it appears that with the ts-940 (which
does seem to work better now over all) and the ft-1000mp that ct
is tracking vfo a for the alt-j and bandmap windows. if i switch
to b the windows blink but go right back to the a frequency. now
this is nice in some ways if you keep your run freq in vfo a and
hunt on b the other stations always see the run freq, but it may
be confusing for some ops... i haven't checked the output log yet
to see if the right vfo's are logged when working split or when
switching to b to work someone then going back to a, has anyone
checked that out yet?
also, if you plan to use 9.37 be sure to check how much memory
you have. i have upgraded to a minimum of 5 meg per machine,
though 4 is probably ok if you don't use a big disk cache or
ramdisk.
--
David Robbins K1TTT (ex KY1H)
k1ttt@berkshire.net or robbins@berkshire.net
http://www.berkshire.net/~robbins/k1ttt.html
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|