SIIG has a 4 port card with 16550 UARTS that can be set to anything from
COM1 through COM8 and any available IRQ. Got mine at Computer City.
It is set to COM3,4,5 and 6 at IRQ's 9,10,14 and 15.
Mike, W1NR
"Wilkowski, Joseph" wrote:
>
> [moderator note: I pointed him to the CT web page, there is a whole
> page there devoted to serial port cards. The information may be
> out-of-date, please send corrections to owner-ct-user@contesting.com]
>
> Folks, I have seen discussion on this subject in the past and never thought
> to much about it. But when I seriously went looking for a 4 port serial
> card that had high speed UARTS I am coming up short. Who has multiple port
> serial cards that support at least four simultaneous serial connections
> without the com1/com3 com2/com4 interrupt sharing problems.
>
> Thanks in advance,
>
> joe k8fc
>
> --
> Submissions: ct-user@contesting.com
> Administrative requests: ct-user-REQUEST@contesting.com
> WWW: http://www.contesting.com/ct/
> Questions: owner-ct-user@contesting.com
--
**************** Give Every Man His Dew **************
Michael A. McCarthy, President
Everest Engineering Corporation, Consultants
4 Barnes Circle, Marlborough, MA 01752
(508) 460-6737, FAX (508) 460-7951
mailto:w1nr@eecorp.com
******************************************************
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|