CT-User
[Top] [All Lists]

[ct-user] FT-847

To: <ct-user@contesting.com>
Subject: [ct-user] FT-847
From: Robert J. Curci" <n2xr@monmouth.com (Robert J. Curci)
Date: Tue, 15 Feb 2000 23:11:11 -0500
I'm glad to see the support for the FT-847.  Although it doesn't work 100%.
It does change bands just fine, whether from CT or the radio.  They both
update.  The spots with ALT-J work fine too.  But.....

The mode doesn't switch.  When I press the cw switch on the radio, CT stays
in ssb mode.  When I change to cw in CT, the radio stays wherever it was and
then I can't get CT to go back to ssb unless I exit and restart CT.

My settings were:

FT847 9600, n82 no flow control
CT was in FD mode.

I'll experiment with the other contests to see if it's global.

73 de Bob
n2xr
----- Original Message -----
From: "AEL" <nq3a@steelcity.net>
To: <ct-user@contesting.com>
Sent: Tuesday, February 15, 2000 11:36 PM
Subject: [ct-user] FT-847


>
> I have not been able to get my FT-847 to work with CT-only get radio
> time-out
> I have upgraded to ver 9.48 and am using null-modem 9-pin serial cable
> My comstr1 settings are: -b9600 -n82
> FT-847 menu #37 set for 9600
> Ct runs perfect with my FT-1000 with TNC & Radio Control
> What am I missing with the FT-847?
> Art-NQ3A
>
>
> --
> Submissions:              ct-user@contesting.com
> Administrative requests:  ct-user-REQUEST@contesting.com
> WWW:                      http://www.k1ea.com/
> Questions:                owner-ct-user@contesting.com
>
>


--
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
WWW:                      http://www.k1ea.com/
Questions:                owner-ct-user@contesting.com


<Prev in Thread] Current Thread [Next in Thread>