CT-User
[Top] [All Lists]

[ct-user] Grabbing packet spots to a TS940

To: <ct-user@contesting.com>
Subject: [ct-user] Grabbing packet spots to a TS940
From: kd2p@att.net (kd2p@att.net)
Date: Mon, 16 Oct 2000 13:29:15 +0000
I have encountered an annoying problem when grabbing 
packet spots to my TS940 from CT 9.47.  

When grabbing packet spots with a split frequency, no 
problem.  However, when no split frequency is spotted, 
my TS940's VFO A is set to the spotted frequency and VFO 
B is set to 14000, no matter what band the spot or radio 
is on.  Is there a way to prevent VFO B from 
being "reset" to a potentially out-of-mode and nearly 
out-of-band situation?

I would like to have only one of the VFOs set if there 
is no split advertised or have both VFOs set to the same 
frequency, if there is no way to change the command 
string.  

Pat, KD2P


--
                        
                        
                        

--
WWW:                      http://www.k1ea.com/
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
Problems:                 owner-ct-user@contesting.com


<Prev in Thread] Current Thread [Next in Thread>