Thanks for the replies. Comtsr seems to load ok and CT is set to radio 1(it's
the version and setup as with 9.37b.) Pardon my ignorance, but what is CDe?
(I agree about the flakiness of the CT/OMNI VI combination.)
Bernie, W1AZ
On 23-Nov-00 James White wrote:
>
> and you do have the rig set as radio 1, no?
>
> and your comtsr does appear to be running...
>
> GL
>
> Jim, K4OJ
>
>
> ----- Original Message -----
> From: "Jim Brannigan" <jbrannig@optonline.net>
> To: <ct-user@contesting.com>
> Sent: Thursday, November 23, 2000 1:37 PM
> Subject: Re: [ct-user] Problem interacting with Ten-Tec OmniVI
>
>
>>
>> Bernie,
>> Make sure that CDe is ON.
>> Also CT has always been a little flaky with my OMNI VI
>>
>> Jim
>>
>> >
>> > I'm trying to set up ct9.53 to work with a TenTec Omni VI. The setup
>> works ok
>> > with 9.37b, but with 9.53 changing bands in CT is not reflected on the
>> radio.
>> > (The message 'radio not echoing') appears in CT. If band/frequency are
>> changed
>> > on the radio, the changes are reflected in CT, so there is some
>> communication,
>> > and as I said, it does work ok with 9.37b. Any suggestions would be
>> > appreciated.
>> >
>> >
>> >
>> >
>> > Bernie Gardner, W1AZ
>> > bernieg1@mediaone.net
>> >
>> > --
>> > WWW: http://www.k1ea.com/
>> > Submissions: ct-user@contesting.com
>> > Administrative requests: ct-user-REQUEST@contesting.com
>> > Problems: owner-ct-user@contesting.com
>> >
>> >
>>
>>
>> --
>> WWW: http://www.k1ea.com/
>> Submissions: ct-user@contesting.com
>> Administrative requests: ct-user-REQUEST@contesting.com
>> Problems: owner-ct-user@contesting.com
>>
>>
>
>
> --
> WWW: http://www.k1ea.com/
> Submissions: ct-user@contesting.com
> Administrative requests: ct-user-REQUEST@contesting.com
> Problems: owner-ct-user@contesting.com
Bernie Gardner
bernieg1@mediaone.net
--
WWW: http://www.k1ea.com/
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
Problems: owner-ct-user@contesting.com
|