In a word NO
Just tested this one in the 10M computer.
Setup
Single assisted, Mixed mode, mono 10
FT1000 E/W Rig control on
28010 typed in call sign field, rig goes to 28010
Here are the results of the different fields I would normally watch
Alt-Z Rpt Mode CW Status Summary
CW 599 C ON SSB/ALL
When I hit Ctrl-F1
* ** *** **** @ SSB/ALL
* = FLASH TO SSB THEN BACK TO CW
** = FLASH TO 59 THEN BACK TO 599
*** = FLASH TO S THEN BACK TO C
**** = FLASHES OFF THEN BACK ON
@ = NEVER CHANGES
Rig set at 28500 SSB mode
Hit Ctrl-F1 Rig goes to CW
Other windows mentioned above behave the same way
as it did at 28010
Went to setup, Radio1 = None
Went thru the same setps as above and everything was the SAME..
Going back to 963 or so.
Take care
73/Bob
W4MYA
----- Original Message -----
From: "Jim Reisert" <ad1c@yahoo.com>
To: "K1EA" <k1ea@contesting.com>; <ct-user@contesting.com>
Sent: Friday, December 14, 2001 1:21 PM
Subject: Re: [ct-user] CT970
> 9.70.002 which Ken recently put in the vault should have a fix for the
CW/SSB
> problem in ARRL 10 meter. Can someone who was having this problem please
try
> out the latest version and report back to the reflector?
>
> Thanks - Jim
>
> --- K1EA <k1ea@contesting.com> wrote:
>
> > Fixes the "score shows zero" problem in the summary sheet.
>
>
|