The CW interface is in LPT1. I run ONE program at a time... Each program is
pointed to LPT1 for the CW interface. The cable is from the PC to the
radio, not from each "program" to the radio so yes they both use the same
cable but not simultaneously.
It's the same setup I had on Windows ME.
Carl
----- Original Message -----
From: "Steve Baron - KB3MM" <SteveBaron@StarLinX.com>
To: "Carl - WC4H" <wc4h@itis.net>
Sent: Sunday, December 30, 2001 8:02 PM
Subject: Re: [ct-user] Windows XP / CT Win Question
> Actually ME does not have many problems....by itself.
>
> I'm confused ... are you saying that you are now running XP with Win-EQF
and
> WIn-CT - both using the same cable and Win CT doesn't run (due to trying
to
> access the LPT port) but Win-EQF does run and uses the LPT port without
> problem?
>
>
> ----- Original Message -----
> From: "Carl - WC4H" <wc4h@itis.net>
> To: "ctuser" <ct-user@contesting.com>
> Sent: Sunday, December 30, 2001 23:52
> Subject: Re: [ct-user] Windows XP / CT Win Question
>
>
> > Yes, Win-EQF purposely uses the same interface as CT. Both programs
were
> > working with Windows ME, but ME has too many other problems to keep!
> >
> > No I did not load direct-io.
> >
> > Carl
> >
> > ----- Original Message -----
> > From: "Steve Baron - KB3MM" <SteveBaron@StarLinX.com>
> > To: "Carl - WC4H" <wc4h@itis.net>
> > Sent: Sunday, December 30, 2001 5:28 PM
> > Subject: Re: [ct-user] Windows XP / CT Win Question
> >
> >
> > > Are you saying that Win-EQF uses the LPT port with thw same wiring and
> has
> > > no problem ? Did you load direct-io ?
> > >
> >
> >
> >
> > _______________________________________________
> > ct-user mailing list
> > ct-user@contesting.com
> > ct-user-request@contesting.com Subject=unsubscribe to unsubscribe
> > http://lists.contesting.com/mailman/listinfo/ct-user
> >
> >
> >
>
>
|