Hello Ken,
is it possible to use another stack?
We have still the problem, that after a certain time the communication
between our PC is only one-way.
73
Andy, DK4WA
> -----Ursprüngliche Nachricht-----
> Von: Ken Wolff [mailto:kwolff@charter.net]
> Gesendet am: Dienstag, 5. März 2002 13:50
> An: 'Bob Glasgow'; 'ctuser'
> Betreff: RE: [ct-user] FW: Require Fuller Description of Switch?
>
> Bob,
>
> The -enet switch for CT under DOS is supposed to be "secret." The DOS
> version of CT talks to a commercial TCP/IP stack from FTP Software
> called PCTCP. The Ethernet is then used for networking between
> computers.
>
> PCTCP is what we use at K1AR and KC1XX for networking and has
> been 100%
> reliable. It also allows us to use batch files to update all the
> computers very quickly using TFTP, if we need a new country file, or
> need to merge the logs.
>
> Unfortunately, FTP Software was acquired by NetManage and PCTCP is no
> longer sold or supported.
>
> CTWin uses the IP stack provided by Windows for networking,
> so -enet is
> "public."
>
> - Ken K1EA
>
> -----Original Message-----
> From: ct-user-admin@contesting.com
> [mailto:ct-user-admin@contesting.com]
> On Behalf Of Carl - WC4H
> Sent: Tuesday, February 26, 2002 2:27 PM
> To: Bob Glasgow; ctuser
> Subject: Re: [ct-user] FW: Require Fuller Description of Switch?
>
> I think that you get is direct TCP/IP connections via your ethernet
> card.
> No serial connection and consequently no NETTSR required. I may be
> wrong
> though.
>
> 73
> Carl
>
> ----- Original Message -----
> From: "Bob Glasgow" <bob.gm4uyz@btinternet.com>
> To: "CT-USER (messages to group)" <ct-user@contesting.com>
> Sent: Tuesday, February 26, 2002 1:26 PM
> Subject: [ct-user] FW: Require Fuller Description of Switch?
>
>
> >
> >
> > -----Original Message-----
> > From: Bob Glasgow [mailto:bob.gm4uyz@btinternet.com]
> > Sent: 25 February 2002 19:27
> > To: CT-USER REQUESTS
> > Subject: Require Fuller Description of Switch?
> >
> >
> > Hi All,
> >
> > This might sound a stupid query but what does the Switch -ENET
> (enables
> > Ethernet) really give me. I have already the network set-up using
> Ethernet
> > by loading a Packet Driver and then the NETTSR so what else does it
> offer.
> > It is like some of the other switches there is no full
> description on
> what
> > they do or use i.e. the _-CFG says Load different CT.CFG file but
> where do
> > you tell it the file to load?
> >
> > Any thoughts would be helpful.
> >
> > Bob Glasgow GM4UYZ
> > ---
> > Outgoing mail is certified Virus Free.
> > Checked by AVG anti-virus system (http://www.grisoft.com).
To: <ct-user@contesting.com>
> > Version: 6.0.325 / Virus Database: 182 - Release Date: 19/02/02
> >
> > ---
> > Outgoing mail is certified Virus Free.
> > Checked by AVG anti-virus system (http://www.grisoft.com).
To: <ct-user@contesting.com>
> > Version: 6.0.325 / Virus Database: 182 - Release Date: 19/02/02
> >
> > _______________________________________________
> > ct-user mailing list
> > ct-user@contesting.com
> > ct-user-request@contesting.com Subject=unsubscribe to unsubscribe
> > http://lists.contesting.com/mailman/listinfo/ct-user
> >
>
> _______________________________________________
> ct-user mailing list
> ct-user@contesting.com
> ct-user-request@contesting.com Subject=unsubscribe to unsubscribe
> http://lists.contesting.com/mailman/listinfo/ct-user
>
> _______________________________________________
> ct-user mailing list
> ct-user@contesting.com
> ct-user-request@contesting.com Subject=unsubscribe to unsubscribe
> http://lists.contesting.com/mailman/listinfo/ct-user
>
|