CT-User
[Top] [All Lists]

[ct-user] Re: CT and Laptops

To: <ct-user@contesting.com>
Subject: [ct-user] Re: CT and Laptops
From: f6fgz@free.fr (Gérard Parat)
Date: Fri, 31 May 2002 20:31:40 +0200
Problem solved !

It was a configuration problem as often ;-)

I put CONFIG.SYS and AUTOEXEC.BAT for both laptops in attachment. It may avoid
tearing hair out for hours ...

(1) First setup is a Compaq Contura 400C with a 3Com 3C589B/C Ethernet
PCMCIA card.
(2) Second setup is a Dell Latitude CPi A300ST with a 3Com 3C589D Ethernet
PCMCIA card.

The main task was to find on Internet the miscellaneous CardSoft files (PCMCIA)
and avoid to spend 79$ for old unmaintained MS-DOS utilities. After spending a
lot of time, I found directories were they were available.

Everything is working on both setups (radio, network and controls) and seems
stable after several dummy logs (at least for CT967 and a TS850).

--
73 Gérard F6FGZ



@ECHO OFF
PATH C:\WINDOWS;C:\WINDOWS\COMMAND;C:\CT;C:\WINZIP
SET PROMPT=$P$G
SET TEMP=C:\TMP
SET LMOUSE=C:\MOUSE
rem - By Windows Setup - LH /L:0;1,25808 /S C:\MOUSE\MOUSE
LOADHIGH C:\WINDOWS\COMMAND\DOSKEY
mode con codepage prepare=((850) C:\WINDOWS\COMMAND\ega.cpi)
mode con codepage select=850
keyb fr,,C:\WINDOWS\COMMAND\keyboard.sys
c:\temp\3c589\3c589pd 0x6f
cd ct
nettsr 192.151.78.102
wpx
@ECHO OFF
PROMPT $P$G
C:\WINDOWS\SMARTDRV.EXE 2048
C:\WINDOWS\COMMAND\NLSFUNC C:\WINDOWS\COMMAND\COUNTRY.SYS
C:\WINDOWS\COMMAND\KEYB FR,850,C:\WINDOWS\COMMAND\KEYBOARD.SYS
SET PATH=C:\DOS;C:\WINDOWS\COMMAND
DOSKEY
SET TZ=UTC0
SET CTPATH=D:\CT
SET TEMP=F:
D:
CD CT
C:\DOS\3C589PD 0x6F
D:\CT\NETTSR 192.151.78.101
wpx

DEVICE=C:\WINDOWS\HIMEM.SYS
DEVICE=C:\WINDOWS\EMM386.EXE NOEMS X=D000-DFFF X=CA00-CBFF
FILES=40
DOS=UMB
LASTDRIVE=Z
DEVICEHIGH /L:2,9088 =C:\WINDOWS\COMMAND\ANSI.SYS
DOS=HIGH
BREAK=ON
DEVICE=C:MOUSE\IMES_CD.SYS /D:IMESCD01
device=C:\WINDOWS\COMMAND\display.sys con=(ega,,1)
Country=033,850,C:\WINDOWS\COMMAND\country.sys
REM *** Gestionnaires PCMCIA - D,but
REM Avertissement : Ne d,placez pas ces lignes, ne modifiez pas leur ordre et 
ne les supprimez pas.
REM
DEVICE=C:\CPQDOS\PCMSMIX.EXE
DEVICEHIGH=C:\CPQDOS\SSVLSI.EXE
DEVICEHIGH=C:\CPQDOS\CS.EXE
DEVICE=C:\CPQDOS\CSALLOC.EXE
;DEVICEHIGH=C:\CPQDOS\ATADRV.EXE
DEVICEHIGH=C:\CPQDOS\CARDID.EXE C:\CPQDOS\CARDID.INI
;DEVICEHIGH=C:\CPQDOS\MEMDRV.EXE
;DEVICEHIGH=C:\CPQDOS\DBLFLASH.EXE
;DEVICEHIGH=C:\CPQDOS\MS-FLASH.SYS
REM *** Gestionnaires PCMCIA - Fin

DEVICE=C:\WINDOWS\HIMEM.SYS /TESTMEM:OFF
DEVICE=C:\WINDOWS\EMM386.EXE NOEMS X=D000-DFFF X=CA00-CBFF
DEVICE=C:\DOS\CARDXTND.SYS
DEVICEHIGH=C:\DOS\SSCBTI.SYS
DEVICEHIGH=C:\DOS\CS.SYS
DEVICE=C:\DOS\CSALLOC.EXE C:\DOS\CSALLOC.INI
rem DEVICE=C:\DOS\CARDID.SYS C:\DOS\CARDID.INI
DOS=HIGH,UMB
STACKS=0,0
FILES=30
BUFFERS=15
DEVICEHIGH=C:\WINDOWS\COMMAND\ANSI.SYS
DEVICEHIGH=C:\WINDOWS\RAMDRIVE.SYS 16000 /E
DEVICE=C:\DELL\RTC.CLK +R
DEVICEHIGH=C:\WINDOWS\COMMAND\display.sys con=(ega,850,1)
COUNTRY=033,850,C:\WINDOWS\COMMAND\COUNTRY.SYS
BREAK=ON


--- StripMime Report -- processed MIME parts ---
multipart/mixed
  text/plain (text body -- kept)
  text/plain (text body -- kept)
  text/plain (text body -- kept)
  text/plain (text body -- kept)
  text/plain (text body -- kept)
---

<Prev in Thread] Current Thread [Next in Thread>