CT-User
[Top] [All Lists]

[ct-user] CTWin & Telnet spots

To: <ct-user@contesting.com>
Subject: [ct-user] CTWin & Telnet spots
From: w6sw@jps.net (Randy Powell)
Date: Wed, 27 Nov 2002 05:14:06 -0800
I've installed CTWin 9.81.002 on a Windows 98 machine with a DSL internet
connection, but I keep getting error msgs like "Could not open
HTTP://OH2AQ.KOLUMBUS.COM/DXS/";
I haven't entered anything in the setup screen.  What am I missing to get
the dx spots into CTWin off the internet?

73, Randy
w6sw@jps.net

----- Original Message -----
From: "N2TK" <tony.kaz@verizon.net>
To: "'David Robbins'" <k1ttt@arrl.net>; <CT-User@contesting.com>
Sent: Friday, November 22, 2002 8:51 AM
Subject: RE: [ct-user] CTWin & Telnet spots


How do you find the address to dxtelnet or other recommended telnet for
CTWIN? When I hit alt-T I get the packet window. Is that where I type in the
address?
In the setup screen, where I would normally set the baud rate, etc for
radio, and tnc, do I leave my com1 port blank for telnet?
Packet system doesn't work too well hr during a contest. Thought I would try
telnet.
Tnx
Tony
N2TK

-----Original Message-----
From: ct-user-admin@contesting.com [mailto:ct-user-admin@contesting.com]On
Behalf Of David Robbins
Sent: Thursday, November 21, 2002 16:47
To: 'Axel.Schernikau'; CT-User@contesting.com
Subject: RE: [ct-user] CTWin & Telnet spots

Turn off dxtelnet.  Configure tnc as 'telnet' in ct setup screen.  after
ct starts do alt-t to open the cluster window and hit enter, it will
prompt for the address to telnet to, enter that and hit enter... done.



David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net


> -----Original Message-----
> From: ct-user-admin@contesting.com
[mailto:ct-user-admin@contesting.com]
> On Behalf Of Axel.Schernikau
> Sent: Thursday, November 21, 2002 21:17
> To: CT-User@contesting.com
> Subject: [ct-user] CTWin & Telnet spots
>
> Hello,
>
> probably an easy question for the real contesters on the list.
>
> I'm using a Win2k-laptop running CTWin and DX-Telnet.
> Getting DX-spots in DX-Telnet via Internet-Connection using DSL over
the
> network card.
>
> I'm not trying to build a network of several PCs, just wont to get the
> spots from the Telnet-connection into CT to use spot-features of CT.
Any
> suggestions who to do this (including configurations) are welcome.
> Haven't found anything on this only a few hints to connect DOS-PC and
> Win-PC etc.
>
> Thanks a lot.
>
> Wish all good luck in the WW DX.
>
> Axel Schernikau, DL6KVA
> dl6kva@qsl.net
>
> _______________________________________________
> CT-User mailing list
> CT-User@contesting.com
> CT-User-request@contesting.com Subject=unsubscribe to unsubscribe
> http://lists.contesting.com/mailman/listinfo/ct-user

_______________________________________________
CT-User mailing list
CT-User@contesting.com
CT-User-request@contesting.com Subject=unsubscribe to unsubscribe
http://lists.contesting.com/mailman/listinfo/ct-user


_______________________________________________
CT-User mailing list
CT-User@contesting.com
CT-User-request@contesting.com Subject=unsubscribe to unsubscribe
http://lists.contesting.com/mailman/listinfo/ct-user


<Prev in Thread] Current Thread [Next in Thread>