Hi Gerben, thank you for the good news!
73 - Jim AD1C
--- "Gerben A.Menting" <pa5nt@dx.to> wrote:
> I have tried CTWin 9.85.003 with my FT897 and so far it looks as if it
> works all fine. You have to select the FT847 in the setup menu of CT. I
> have use 4800 and 9600 baud rate connection via the original CT62 Yaesu
> interface cable.
> I just now tried it with version CTWin 9.87 and it works also OK.
>
> Regards,
>
> Gerben - PA5NT
>
> -----Original Message-----
> From: ct-user-bounces@contesting.com
> [mailto:ct-user-bounces@contesting.com] On Behalf Of Jim Reisert AD1C
> Sent: Saturday, March 01, 2003 14:04
> To: ct-user@contesting.com
> Subject: [ct-user] FT-897 in CT
>
> Does anyone have a Yaesu FT-897 they can try with a recent copy of CT?
> Try the FT-847 setting and see if the radio is controlled properly by
> CT, and let Ken and/or me know (or the reflector).
=====
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <jjreisert@alum.mit.edu>, http://www.ad1c.com
PGP Fingerprint: D8E2 3D78 339F A7F1 8C13 1193 B5D1 4FB6 79D1 70DC
|