Hello All,
The below information is Thanks to:
Steve, N8BJG - Hank, K8DD, and others...
The best way to network computers using CTWin
is to get a 4 port Router (Under $50.00). Each computer
will need an Ethernet card (Under $20.00).
Connect the computers to the router and start CTWin on each
computer using the -enet switch.
( "C:\Program Files\K1EA software\CTwin\ctwin.exe" -enet ).
Disregard the NETWORK line in CT.cfg. Leave it blank.
Assign each computer a different station number in the Multi.cfg
file. Also, the multi.cfg file needs a 0 line too. See below.
0
1 RUN
2 MULT
3 20
4 40
That should do it. I have it working great here using
the above set-up and there is another great advantage
to doing it this way. If you have a cable modem you
can connect it to the router and you will have very high
speed Packetcluster spots going to all computers
with no delay and no disconnects!!!!
See you in the pile-ups.
73, Ted K2QMF
________________________________________________________________
The best thing to hit the internet in years - Juno SpeedBand!
Surf the web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!
|