DOS 6.22 for now. I'm wanting the ports for rig control (two each) and TNC
connection. I don't know if IRQ sharing is feasible for that. I don't
speak "IRQ sharing". Thanks for the recommendation.
Ed - W0YK
> -----Original Message-----
> From: Jim Reisert AD1C [mailto:email@example.com]
> Sent: Saturday, September 13, 2003 5:20 AM
> To: firstname.lastname@example.org; CT-User@contesting.com
> Subject: Re: [ct-user] PCI Serial I/O Card Recommendation
> At 03:36 AM 9/13/2003, J. Edward \(Ed\) Muns wrote:
> >Does anyone have a recommendation for brand of PCI I/O card with
> two serial
> >RS232C ports? I need to add two more ports to one of my logging/rig
> >computers. Fry's has several brands and types, some with parallel ports,
> >too. The Internet has a spectrum of cards. Maybe any will work
> fine, but
> >if anyone has experience they can share it may save me some grief.
> DOS or Windows? IRQ sharing or not?
> In my Windows XP environment, I have had good luck with the
> CompUSA "house"
> brand (FMI) 2S/1P card:
> This card uses standard NetMOS drivers. It's an IRQ-sharing card. It's
> significantly cheaper than name-brand (SIIG etc.) cards.
> 73 - Jim AD1C
> Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
> USA +978-251-9933, <email@example.com>, http://www.ad1c.com
> PGP Fingerprint: D8E2 3D78 339F A7F1 8C13 1193 B5D1 4FB6 79D1 70DC
CT-User mailing list
CT on the web: http://www.k1ea.com/