Hi all
Am trying to switch cw keying on CTWIN by the ALTERNATE.
Before installing the relay on pin14 of LPT1, am just monitoring the voltage on
this pin 14...it is 5v.....
When I switch CTWIN from one radio to radio 2...by the command alternate.,
there is always 5 v on this pin 14.....
What am I missing ..Is this pin 14 supposed to be in low(no voltage) when I
switch from one radio to another????
I would appreciate your help very much.
Thanks\
NOEL
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|