At 10/22/2004 08:33 AM, Steve and Judy wrote:
>Hi Guys,
>I am trying to make DVP V1.01 run with CT V10.010
>Everything appears to work ok apart from not being able to enter the DVP set
>up.
>I can record the F1 to F7 msgs ok and playback these ok, but no joy with the
>HISCALL F5 key.
>Anyone any ideas.
I personally haven't tried F5 with a DVP, but have you recorded all of the
letter and number files? Are they in the proper DVP directory?
>The whole thing works perfectly using CT V8
>and CT386.EXE, I could use this but how do I produce a Cabrillo log ?
You can use V8 and then use 8to9.exe to convert to V9 and then 9to10.exe to
convert to V10 and then use V10 to produce the Cabrillo
>73 to all Steve ZC4LI, ZD8Lii, G0Lii, 5B4AHA, C4C, G5G to G8G etc.
>
>PS. If you are waiting for a ZC4LI QSL card please be patient as they have not
>yet arrived from the printers.
>
>_______________________________________________
>CT-User mailing list
>CT-User@contesting.com
>http://lists.contesting.com/mailman/listinfo/ct-user
>CT on the web: http://www.k1ea.com/
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|