With the recent postings about CTWIN with W2K and XP, I did a little testing.
I have an XP and a W2K machine set up on my network with CTWIN 10.01.01. I
invoked CT with the -enet switch. I was able to log from one machine to the
other and send gab messages. However, I did notice that if I had the W3K
machine set as station 1, that it gave me a message, Fail to open LPT1. I
don't use the LPT port for anything, so it was a mystery. It then did not
bring up the network setup window. If I set the machine to any other station
(that didn't conflict with the other machine), I didn't get that message and
the network setup window came up. So, I would avoid using station 1 until that
mystery can be solved.
At 11/1/2004 05:47 AM, Hamad 9K2HN wrote:
>Hi,
>
> I need help networking two ctwin (latest version) in win2k
>machines, I started the program with -enet and it didn't work.... Can
>some one point me what to do step by step.
>
>Thank you
>
>de 9k2hn
>
>_______________________________________________
>CT-User mailing list
>CT-User@contesting.com
>http://lists.contesting.com/mailman/listinfo/ct-user
>CT on the web: http://www.k1ea.com/
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|