With CT DOS you need to load COMTSRx.EXE for the specific COM port. Have you
loaded this before starting CT DOS? Is the serial port on the laptop enabled
and working?
At 2/12/2005 07:20 PM, Filipe Lopes wrote:
>Hi ALL,
>
>I have CT for win on a pentium III which makes a lot of noise on 160m and 80m
>so i am going to make the future contests
>(untill problem solved) with an old LAPTOP which had previously runned with CT
>perfectly without any RAIDO connection.
>
>I've done some contests with my Pentium III and CT for win and the RIG control
>works fine, and now testing with CT for DOS
>it just doesnt work, i've set the COM port to COM1, i've tested the COM port
>and it works, i just dont understand why it doesnt work.
>
>Even the LPT CW interface works fine..
>
>Any help please, wanna make ARRL CW without noise on 160m LoL...
>
>73'S Filipe CT1ILT aka CQ0T, CT7B, CS6T
>_______________________________________________
>CT-User mailing list
>CT-User@contesting.com
>http://lists.contesting.com/mailman/listinfo/ct-user
>CT on the web: http://www.k1ea.com/
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|