>
>
>Date: Sun, 18 Jun 2006 16:57:34 GMT
>From: "wv2b@juno.com" <wv2b@juno.com>
>Subject: [ct-user] CW Functions
>To: ct-user@contesting.com
>Message-ID: <20060618.095739.5451.168776@webmail56.nyc.untd.com>
>Content-Type: text/plain
>
>Hi Folks,
>I have put CT on my laptop to use for logging during a Dxpedition. I can't
>seem to get the CW sending to work. The serial interface seems OK because it
>causes dits to send when starting or turning off the computer. I have
>indicated LPT1 on the CT start menu, and put what I want sent in the
>programming for the F keys, but they don't send. What am I not doing, or doing
>wrong? I also tried LPT2, etc. but nothing works. Thanks and 73, Duane, WV2B
>
>
>
>
Try placing a diode in series with the LPT port connection to isolate
the keyed circuit.. Also make sure that in your computer BIOS setup you
have the LPT-1 configured for bi-direction or try the choices in the
BIOS that are available. One of the setting should should work for
proper keying for you.
73
Herb Schoenbohm, KV4FZ
St. Croix, VI
www.xgensis.com/kv4fz (for a look at the QTH on beautiful St. Croix.)
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|