--- "N2TK, Tony" <tony.kaz@verizon.net> wrote:
> Trying to get an Icom 756 Pro-2 to talk to CTWIN. Using version 10.03. When
> I select either 756 or 756 PRO-2 or 756 PRO-3 CTWIN does not echo.
> When I select 756 PRO, CTWIN can control the radio. But changing bands or
> spinning the vfo on the radio does nothing with CT.
> Any ideas how to correct?
Hi Tony,
Two issues:
The HEX address in the radio must match an ICOM HEX address that CT knows
about. All 756-series use the same control code in CT I believe.
Second, for the ICOM to "babble" the radio CI-V interface must be in
"transceive" mode. This is one of the "others" settings. You probably have it
turned off.
73 - Jim AD1C
--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <jjreisert@alum.mit.edu>, http://www.ad1c.us
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|