--- Ken Brown <ken.d.brown@hawaiiantel.net> wrote:
> Thanks for the suggestions. Upon further examination I have determined
> that the CT.CFG file IS being used to load the canned CW messages. Yet
> it always comes up in CQWW contest mode, on 20 meters if there is not
> already an ARRL06.BIN file.
Hi Ken,
It sounds like you might be missing one important concept. The settings in
CT.CFG are applied to a NEW .BIN file once only, the first time you create it.
CT saves those settings in the .BIN file, and the next time CT loads the .BIN
file, it ignores the CT.CFG file and gets the settings from the .BIN file.
So once your .BIN file is properly configured, you don't need the CT.CFG file
again, until the next contest.
73 - Jim AD1C
--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <jjreisert@alum.mit.edu>, http://www.ad1c.us
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|