CT-User
[Top] [All Lists]

Re: [ct-user] Need K1EA DVP Cable Schematic

To: N6KI Dennis Vernacchia <n6ki_73@sbcglobal.net>,CT-User@contesting.com
Subject: Re: [ct-user] Need K1EA DVP Cable Schematic
From: Ed K1EP <k1ep.list@gmail.com>
Reply-to: k1ep.list@gmail.com
Date: Tue, 27 Mar 2007 04:22:41 -0400
List-post: <mailto:ct-user@contesting.com>
At 3/27/2007 03:51 AM, N6KI Dennis Vernacchia wrote:
>I have  the documentation for the K1EA DVP Card
>but lack a schematic and could only find a busted link
>on website to DVP.
>
>    Anyone have schematic. I need to convert an ICOM Cable to Yaesu

If you can't find the schematic for the DVP, then you can use an Icom manual 
and Yaesu manual to see the pinout differences.  I know Icom doesn't change 
their pinouts and their manual is on line.  Not sure about Y.


>73, Dennis N6KI
>San Diego
>_______________________________________________
>CT-User mailing list
>CT-User@contesting.com
>http://lists.contesting.com/mailman/listinfo/ct-user
>CT on the web:  http://www.k1ea.com/

_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web:  http://www.k1ea.com/

<Prev in Thread] Current Thread [Next in Thread>