Hi Everyone:
We've used the K3 with CT DOS. The only glitch was that, in starting COMTSR,
it didn't like
one of the following two switches:
-XON and -RTS. I THINK it was -RTS. Make sure not to use these when starting
COMTSR.
73,
Mark, KD4D
-------------- Original message ----------------------
From: Ed K1EP <k1ep.list@gmail.com>
> I have used CTWin and CTDos with my K3 with USB (in Win) with no problems.
>
> At 8/21/2008 02:20 PM, Dennis Vernacchia wrote:
> >Try selecting Kenwood TS-50 or another Kenwood Xcvr.
> >It works for CTDOS
> >and worth a try for CTWIN
> >
> >
> >73, Dennis N6KI
> >Sandy Eggo
> >
> >On Thu, Aug 21, 2008 at 11:03 AM, Don Richards <donsay2@cox.net> wrote:
> >
> > > I suppose it is useless to ask the following questions since it appears
> > > CTWin is no longer being supported but, just in case, here is my
> > > question: Is there a way to select K3 as the transceiver being used as
> > > well as its baud rate? Since most new computers come without serial
> > > ports but with USB ports, is there a problem in using a USB to RS-232
> > > converter and selecting a port number relative to those listed in the
> > > CTWin software setup?
> > > W7UPF donsay2@cox.net
> > > _______________________________________________
> > > CT-User mailing list
> > > CT-User@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/ct-user
> > > CT on the web: http://www.k1ea.com/
> > >
> >_______________________________________________
> >CT-User mailing list
> >CT-User@contesting.com
> >http://lists.contesting.com/mailman/listinfo/ct-user
> >CT on the web: http://www.k1ea.com/
>
> _______________________________________________
> CT-User mailing list
> CT-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/ct-user
> CT on the web: http://www.k1ea.com/
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|