CT will correctly read the radio when CT first loads up. The initial band,
mode, and freq (in the bandmap) are correct. After that no more read data,
jsut commands to the radio.
The plot thickens. I seem to remember that polling time used to be an
adjustable parameter. Anyone know about that?
Dan Zeitlin - K2YWE
South Shore ARC - K3AU
Annapolis, Maryland
http://danzee.org
--- On Mon, 8/8/11, Dan Z <k2ywe@yahoo.com> wrote:
> From: Dan Z <k2ywe@yahoo.com>
> Subject: IC-706MKIIG Interface
> To: ct-user@contesting.com
> Date: Monday, August 8, 2011, 10:31 PM
> I have been using CTWIN under XP with
> an FT-1000MP and an FT-990 withwithout any problems for a
> great while.
> I just added an IC-706MKIIG and put together a CI-V (CAT)
> interface. I can control the radio perfectly well with
> CT, but CT won't respond to any data messages back from the
> radio.
> I have looked at the messages on the RS-232 side of the
> interface using a communications tool and see valid messages
> (according to the Icom documentation) coming back from the
> radio.
> I've tried 4800 baud and 19200. I'm currently
> troubleshooting at 4800.
> Any ideas?
>
>
> Dan Zeitlin - K2YWE
> South Shore ARC - K3AU
> Annapolis, Maryland
> http://danzee.org
>
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|