Karlnet
[Top] [All Lists]

RE: [Karlnet] Re: Loading Karlnet Firmware to AP-1000

To: <karlnet@wispnotes.com>
Subject: RE: [Karlnet] Re: Loading Karlnet Firmware to AP-1000
From: "Charles Chia Sheng Wu" <cwu@cwlab.net>
Reply-to: karlnet@WISPNotes.com
Date: Sat, 11 May 2002 12:46:13 -0500
List-post: <mailto:karlnet@WISPNotes.com>
and set to ISP Base station mode (not polling or non-polling base)

-Charles

-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
Behalf Of Terry Bomersbach
Sent: Saturday, May 11, 2002 12:29 PM
To: karlnet@WISPNotes.com
Subject: Re: [Karlnet] Re: Loading Karlnet Firmware to AP-1000


In TC mode, you won't be able to associate with the AP-1000.  You can only
associate with a COR or Karlnet TC ISP Base.  It must be ISP base according
to the docs.

----- Original Message -----
From: "admin " <admin@mail.warpspeedinternet.ws>
To: <karlnet@WISPNotes.com>
Sent: Saturday, May 11, 2002 11:58 AM
Subject: [Karlnet] Re: Loading Karlnet Firmware to AP-1000


> Well Terry, your one up on me. I got the driver to load, chose TC instead
of access point, the key code, ect. but cant associate with the AP1000. Does
the network name have any value in TC mode?
>
> ---------- Original Message ----------------------------------
> From: "Terry Bomersbach" <terryb@the-cia.net>
> Reply-To: isp-wireless@isp-wireless.com
> Date: Fri, 10 May 2002 20:46:55 -0500
>
> >FWIW, remind me to write one up for the TC NDIS for WinNT once I get it
> >figured out.  The card is X'd out in the Client Manager in TC mode and
> >associates just fine in 802.11b mode but doesn't pass packets at all.  I
can
> >see the AP but can't go anywhere.  When I try to connect to the AP or OR
> >using the config.exe I get an error about an invalid IP address or
something
> >about not being able to contact 0.0.0.0 (not exact wording of course).
> >
> >
> >-----Original Message-----
> >From: Bill Fisher <fisher@akorn.net>
> >To: isp-wireless@isp-wireless.com <isp-wireless@isp-wireless.com>
> >Date: Friday, May 10, 2002 8:19 PM
> >Subject: Loading Karlnet Firmware to AP-1000
> >
> >
> >>
> >>FWIW, I have written a short how-to article on how to load Karlnet to an
> >>AP-1000 and published it on WispNotes.com.  You can also post your
comments
> >>to the article if you find something wrong or would like to add
something
> >of
> >>interest.
> >>
> >>http://www.wispnotes.com/articles/12
> >>
> >>Hope this helps someone.
> >>
> >>Best,
> >>
> >>Bill Fisher
> >
> >
> >
> >___________  The ISP-WIRELESS Discussion List  ___________
> >To Join: mailto:join-isp-wireless@isp-wireless.com
> >To Remove: mailto:remove-isp-wireless@isp-wireless.com
> >Archives: http://isp-lists.isp-planet.com/isp-wireless/archives/
> >
>
> --
> Eric L. Johnson
> WarpSpeed Internet
> 1-361-563-3742
> --
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>

_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet


<Prev in Thread] Current Thread [Next in Thread>