Karlnet
[Top] [All Lists]

RE: [Karlnet] 3.88 polling will not work over 13 clients

To: <karlnet@WISPNotes.com>
Subject: RE: [Karlnet] 3.88 polling will not work over 13 clients
From: "Dan Metcalf" <dan.metcalf@wbsysnet.com>
Reply-to: karlnet@WISPNotes.com
Date: Thu, 31 Oct 2002 09:59:05 -0500
List-post: <mailto:karlnet@WISPNotes.com>
Are you bridging?


Dan Metcalf
Wireless Broadband Systems
http://www.wbsysnet.com/
877-685-0578
dan.metcalf@wbsysnet.com


> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On
> Behalf Of Larry Yunker
> Sent: Thursday, October 31, 2002 9:51 AM
> To: karlnet@WISPNotes.com
> Subject: Re: [Karlnet] 3.88 polling will not work over 13 clients
> 
> If you have 20 business clients on the AP, does that indicate that you
> have
> 20 business NETWORKS on this AP?  Each network could have many
> workstations.
> You could have 200+ computers hitting that single AP.
> 
> Ok... enough speculation... in answer to your question, you should
look at
> the specifics.  How much traffic is flowing through your AP? What type
of
> traffic is flowing through the AP? Is something different about the
> traffic
> flow during those 700ms spikes?  What about signal SNR to/from your
> clients
> do ANY of your clients have weak links with lots of lost
> packets/retransmissions?  Dig a little lower than to assume a Firmware
> issue.  It might be firmware, but it might be something to do with the
> environment and the task at hand.
> 
> ----- Original Message -----
> From: "Brenden Cooper" <brenden@megalink.com.au>
> To: <karlnet@WISPNotes.com>
> Sent: Thursday, October 31, 2002 6:16 AM
> Subject: [Karlnet] 3.88 polling will not work over 13 clients
> 
> 
> > I have a base station on the roof of my building I have tried using
a
> > RG1000 with 3.88 Firmware but we came into problems when we got to
13
> > clients, I asked Karlnet and they told me that the RG didn't have
the
> > processing power so we updated it to a AP1000. The funny thing is we
> > still have the problem, Polling doesn't work. The ping fly out to
the
> > 700ms on the RG and the AP We have around 20 Business client on this
> > unit and the only way we can stop it from happening is to turn the
> > polling off which mean we get the other problem that having no
polling
> > causes (hidden node etc.)
> >
> > Any body got any ideas?
> >
> > Thanks
> > Brenden
> > www.megalink.com.au
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >
> 
> 
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
> ---
> [This E-mail scanned for viruses by Declude Virus]


---
[This E-mail scanned for viruses by Declude Virus]


<Prev in Thread] Current Thread [Next in Thread>