It works great like this Shane!!
You can use some fairly cheap cable/dsl routers for around $40. And it will
allow unlimited users. I wouldn't put 500 users behind it but it works great
for residential & SOHO environments.
Nate
-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of shane@golive.co.nz
Sent: Sunday, March 02, 2003 12:11 PM
To: karlnet@WISPNotes.com
Subject: [Karlnet] Re: Karlnet Digest, Vol 3, Issue 2
on 3/3/03 5:05 AM, karlnet-request@WISPNotes.com at
karlnet-request@WISPNotes.com wrote:
> SR-4000 only supports bridging on 1 MAC address
> SR-4100 supports bridging on up to 5 MAC addresses
> SR-4200 supports unlimited MACs
Can I use an SR-4000 in bridging mode, with a basic cable router (eg Asante
FR3004) behind it doing NAT to the client as a complete CPE to connect to
wireless KN network ?
We never use the NAT feature within KN, always install a cheap hardware NAT
box on the client side of the RG.
I presume that the cable router is the only MAC the SR-4000 will see and so
it will work.
Can someone confirm that for me ?
Thanks
Shane
go live ltd
fast wireless internet
ph +64 7 957 0020
fx +64 7 957 0030
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|