4 RED LEDS usually means a mismatched MAC (on the KarlNet load)
in terms of recovering it, you cannot access an RG in forced reload mode -
to recover it, get the RG .bin file (included w/ the ORiNOCO AP manager),
open it in the configurator, and use upload software option in the
configurator directly onto the force reloaded RG (after you change the IP)
-Charles
-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of A. Rod
Sent: Monday, April 21, 2003 1:39 PM
To: Karlnet@WISPNotes.com
Subject: [Karlnet] RG-1000 with 4 red lights
Hello,
I was flashing several RG-1000's today to Karlnet SR4100 and one of
the radios now has 4 red LED's and I can't communicate with it.
Everything seemed normal right up to the end when it reboots and comes
up as a 4100.
any ideas??
I can get it to be in force reload mode. The Orinoco RG software does
not see it.
Best regards,
Rod mailto:things@mail.chiriqui.com
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|