Karlnet
[Top] [All Lists]

RE: Re[2]: [Karlnet] bandwidth management

To: "'wesley allison'" <scgn@pipeline.com>, "'Karlnet Mailing List'" <karlnet@WISPNotes.com>
Subject: RE: Re[2]: [Karlnet] bandwidth management
From: "Kevin Knuth" <kknuth@karlnet.com>
Reply-to: Karlnet Mailing List <karlnet@WISPNotes.com>
Date: Fri, 5 Sep 2003 07:18:33 -0500
List-post: <mailto:karlnet@WISPNotes.com>
All,

If you set "Satellites default to" 256 then ALL satellites get 256.  If
you set up JUST the interface at 256 then that is the maximum bandwidth
allowed out that interface.  They are separate settings.

Kevin

-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com] On Behalf Of wesley allison
Sent: Thursday, September 04, 2003 10:38 PM
To: Slobodan Popovic; Karlnet Mailing List
Subject: Re: Re[2]: [Karlnet] bandwidth management


It was my understanding that when you set an interface to 256 that was
the total bandwidth on that interface, so if you set your base to 256
each client will be sharing 256 and not getting 256 apiece.

wes
----- Original Message ----- 
From: "Slobodan Popovic" <spopovic@wireless.org.yu>
To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
Sent: Thursday, September 04, 2003 6:17 PM
Subject: Re[2]: [Karlnet] bandwidth management


> So, if I set "Satellites default to" under TC Interface Advanced 
> options to 256, that will give 256 kbit/s to each and every client on 
> my base, NOT 256 kbit/s total, right?
>
> Slobodan
>
>
> On Friday, July 18, 2003, Kevin Knuth wrote:
>
> > Yes,
>
> > In that scenario, the RG will only be allowed a 256k connection.
>
> > Kevin
>
> > -----Original Message-----
> > From: karlnet-bounces@WISPNotes.com 
> > [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of 
> > helio@compuland.com.br
> > Sent: Thursday, July 17, 2003 4:58 PM
> > To: Karlnet Mailing List
> > Subject: RE: [Karlnet] bandwidth management
>
>
> > On 17 Jul 2003 at 15:31, Kevin Knuth wrote:
>
> >> WAIT-
> >>
> >> The answer is YES.  BUT- if you have the Wireless on the RG set to 
> >> 256, there is no need to set the AP.
> >>
> >> Setting the AP would control the total amount of bandwidth at the 
> >> Base!
>
> > Sorry but I didn't understand...
>
> > I meant applying the 256K limit to that particular RG MAC address,
using
> > the
> > Turbocell Acess List. So I would limit to 256K the traffic going 
> > from
the AP
> > to the RG, right ?
>
> > Thanks,
> > Helio.-
> > CompuLand ISP Admin
> > GnuPG Public Key: http://www.compuland.com.br/helio/gpgpublic.txt
>
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com 
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com 
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>
>
>
>
>
> --
> Slobodan Popovic
> tehnicki direktor
>
> Centar za razvoj Interneta
> Masarikova 5/712
> 11000 Beograd, Srbija
>
> Tel: (011) 3061-532
> Fax: (011) 3061-554
> Eml: spopovic@wireless.org.yu
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com 
> http://lists.wispnotes.com/mailman/listinfo/karlnet

_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet


<Prev in Thread] Current Thread [Next in Thread>