[Karlnet] KN200 Problems

[LaRoy McCann <lmccann@roachconveyors.com>]

I have a kn200 with the satellite software and 2 200mw cards.  I am using 
it to do ptp to 2 remote locations, each remote on a different frequency.

On sunday I got a call that one of the links was down.
Both the remote unit 2 (kn100 soho 5 user 200mw card freq 3) and the 
satellite could be accessed at its own location, but neither unit could 
"see" the other on the rf side.

The satellite (kn200, 2 200mw cards, sat, unlimited mac) could still work 
with remote unit 1 (kn200, 1 200mw card, sat software, freq 9).

Today, I got a call that the remaining link had quit.  The only thing in 
common is the satellite unit with the 2 cards.  I can still access it 
remotely, but it does not "see" either of the two remote units.

These are the Turbocell units in the aluminum box that Demarc sells.

The link between the two satellite units has been working great for about a 
month (died today).  The link to remote 2 (kn100, soho) was just installed 
last Thursday.  It worked great until Sunday.

These units are about an hour and a half away.  I would like some 
suggestions before I make the trip to check it out.  And yes, the tower is 
still standing.

I have had them unplug the sat unit for about 30 min.  That did not help.

Thanks.

LaRoy McCann
Electrical Engineering Manager
Roach Conveyors
(870) 483-7631 x638
www.roachconveyors.com

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.532 / Virus Database: 326 - Release Date: 10/27/2003