Karlnet
[Top] [All Lists]

RE: [Karlnet] Ubicom woes

To: "'Karlnet Mailing List'" <karlnet@WISPNotes.com>
Subject: RE: [Karlnet] Ubicom woes
From: "Raymundo Garcia" <rgarcia@riograndecom.com>
Reply-to: Karlnet Mailing List <karlnet@WISPNotes.com>
Date: Thu, 11 Dec 2003 19:01:00 +0100
List-post: <mailto:karlnet@WISPNotes.com>
Where can I get some info on those panels... ?? thanks


-----Mensaje original-----
De: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com]
En nombre de Charles Chia Sheng Wu
Enviado el: Viernes, 12 de Diciembre de 2003 06:16 p.m.
Para: Norm Young; Karlnet Mailing List
Asunto: RE: [Karlnet] Ubicom woes

it's here...

$285/$275/$265/$250
Q1-4/Q5-10/Q11-24/Q25+

-Charles

-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Norm Young
Sent: Friday, December 12, 2003 10:57 AM
To: Karlnet Mailing List
Subject: Re: [Karlnet] Ubicom woes


Hi Charles, hows that KN-50/19dB panel CPE coming?

Norm

----- Original Message -----
From: "Charles Chia Sheng Wu" <cwu@cwlab.net>
To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
Sent: Friday, December 12, 2003 7:48 AM
Subject: RE: [Karlnet] Ubicom woes


> you need the locator - check email offlist
>
> -Charles
>
> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
> [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Ben Polson
> Sent: Friday, December 12, 2003 8:54 AM
> To: Karlnet Mailing List
> Subject: [Karlnet] Ubicom woes
>
>
> Hello List.  Well, I've tried now for about 30 minutes to figure out
how
to
> connect to the Ubicom I purchased recently, but am thus far
unsuccessful.
I
> have tried setting my PC's IP to 192.168.1.10/24, 192.168.2.10/24,
> 192.168.255.10/24, and 10.0.1.10/24.  I am using the "Wireless
Navigator"
to
> try and scan for it, and have no firewall software on this PC.  I have
also
> tried using an IE browser to connect manually to the 192.168.1.100
address
> that seems to be listed in the tiny document that came with the Ubicom
> device.  I do have link on both the PC and the Ubicom and have
verified
the
> cables and network ports on the hub and PC are good.  Google didn't
have
any
> answers for me either.
>
> I even became desperate enough to try the Configurator, knowing full
well
> that the Ubicom is not an SNMP device...  :)
>
> Any suggestions?  There are no "Reset to Factory Default" instructions
in
> the document either.  Thanks in advance!
>
> -Ben.
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>


_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet

_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet




_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet

<Prev in Thread] Current Thread [Next in Thread>