I've tried with pigtail cable and antenna.
It was terrible. The Orinoco cards worked with -47dBm signal strength, the
Senao cards worked only in -70dBm.
Of course with same equipment (kernels, antennas, cables).
What would be the reason?
Thanks
Zsolt
-----Original Message-----
From: Didi Harijanto [mailto:didi@sby.dnet.net.id]
Sent: Thursday, March 25, 2004 1:50 PM
To: Karlnet Mailing List
Subject: Re: [Karlnet] Most powerful card
you must put pigtail and antenna
cause that card did't have internal antenna
thx
dd
----- Original Message -----
From: "Fejer Zsolt" <FejerZs@Megatrend.hu>
To: "'Karlnet Mailing List'" <karlnet@WISPNotes.com>
Sent: Thursday, March 25, 2004 7:12 PM
Subject: RE: [Karlnet] Most powerful card
> I've tested senao 200mW cards.
> In RG-1000 it didn't work. Maybe the newest kernel needed.
> Then I put it into KN-205. But it was worst between rooms without external
> antennas. :-(
>
> Zsolt
>
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|