Karlnet
[Top] [All Lists]

RE: [Karlnet] anyone working under this scenario?

To: "'Karlnet Mailing List'" <karlnet@WISPNotes.com>
Subject: RE: [Karlnet] anyone working under this scenario?
From: "Alex Phillips" <alexp@rbns.net>
Reply-to: Karlnet Mailing List <karlnet@WISPNotes.com>
Date: Wed, 6 Oct 2004 14:30:05 -0400
List-post: <mailto:karlnet@WISPNotes.com>
Welcome to our world.

The pc TC driver clients are what kn50's look like and they are the
biggest reason I Can seed as to why the retrans are high.

Someone from TB speak to this please and I think the 4.46 will address
this.



-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Guillermo Bricaire
Sent: Wednesday, October 06, 2004 12:04 AM
To: Karlnet@wispnotes.com
Subject: [Karlnet] anyone working under this scenario?

My WISP Base was hit by lightning, I was running Lucent 4.15 firmware,
now I am running Terabeam 4.44 and 4.45 but the retransmissions on my
ISP Base went up to the sky ( about 50%) even in good quality signal
links. Before replacing the firmware I was having 10% retransmissions
tops and my network was running perfect ( under 4.15 firmware). 
 
I have checked everything cables, connectors, pigtails, cards, antenna,
amplifier and it looks to me ( and also Ed from Terabeam) that there is
some incompatibility with firmware 4.45 and "old" NDIS PC Drivers ( wich
most of my network clients are using) I have probably 25 NDIS PC Drivers
and 6 RG SOHO licenses. My question is the following: is anybody in the
mailing list still running PC Drive Based Turbocell clients? If so, are
they running ok? What firmware are you using in the ISP Base.
 
Thanks all for your help!
G-
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet


_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet

<Prev in Thread] Current Thread [Next in Thread>