The following diagrams are for cables I have used with my OMNI-VI. They
work with CT8, CT9, NA8, and NA9, and they also work with my everyday
logging program - Hyperlog and my beta version of Hyperlog Pro. As for
computers I've used everything from a old 286 to a Pentium 100. I've also
used this setup in M/M situations at N2RM, and for FD with WA2SNA and had no
problems.
DB9 Female to DB25 Male
PC COM OMNI-VI
Pin 2 Pin 3
Pin 3 Pin 2
Pin 5 Pin 7
DB25 Female to DB25 Male
PC COM OMNI-VI
Pin 2 Pin 2
Pin 3 Pin 3
Pin 7 Pin 7
Use three conductor shielded cable and terminate the shield to the connector
hood. If anyone has any questions please feel free to ask.
73,
Warren Walsh - N2BCC
wwalsh@intac.com
--
Submissions: na-user@ve7tcp.ampr.org
Administrative requests: na-user-REQUEST@ve7tcp.ampr.org
Questions: owner-na-user@ve7tcp.ampr.org
|