You shouldn't need a keying circuit with the DVP. You just need to type a
command in the logging window to enable the PTT through the DVP cable. The
command is PTT or ONAIR (one is for CT and the other is NA. SRI can't
remember which on is for which, try them both). The opposite state is NOPTT
or OFFAIR if you just want to listen to the DVP and not transmit (PTT).
Hope this helps.
Jim/K7MK
-----Original Message-----
From: Jay Kesterson [mailto:k0gu@verinet.com]
Sent: Thursday, August 12, 1999 11:02 PM
To: na-user@contesting.com
Subject: [na-user] Keying radio with NA??
Hi all,
A little help please. I'm trying to get NA to key the rig
when using the K1EA DVP. I built the 2N2222 circuit for COM1
(DB9) and it works fine with another program (MSDSP). But no
go on NA. The DVP works OK. I must not have something setup
properly in the program or something not loaded. Any ideas??
73, Jay K0GU k0gu@verinet.com
--
Submissions: na-user@contesting.com
Administrative requests: na-user-REQUEST@contesting.com
WWW: http://www.contesting.com/datom/
Questions: owner-na-user@contesting.com
--
Submissions: na-user@contesting.com
Administrative requests: na-user-REQUEST@contesting.com
WWW: http://www.contesting.com/datom/
Questions: owner-na-user@contesting.com
|